ALLPOWERS 100W 18V 12V Flexible Solar Panel Charger( with ETFE Layer, MC4 connectors)

ALLPOWERS 100W 18V 12V Flexible Solar Panel Charger( with ETFE Layer, MC4 connectors)

Product Specification:

    Optimal power [Pmax]: 100W

    Working voltage [Vmp]: 18V

    Working current [Imp]: 5.56A

    Short circuit current [Isc]: 5.8A

    Open circuit voltage [Voc]: 20V

    Dimensions: 119*54*0.25cm/46.8*21*0.09inch

    Air resistance: 50psf (2400 pascals)

    Snow resistance: 113psf (5400 pascals)

    Hail impact: 25mm (1 inch) at 23 m/s (52mph)

    Net weight: 1.85kg/4.07lb 


Choose your country:





Why Choose ETFE Solar Charger?

Our panel is mainly designed for charging 12V lead-acid batteries, including 12V lithium and other equipment; it can also be bent to 30 degree for installation and provide power in the RV, boat, huts, tents or any other irregular surface. With inbuilt monocrystalline silicon panels which is leading in the word, our products also are upgraded with advanced ETFE lamination which is known for its extraordinary advantages.(The Beijing Olympic Aquatics Centre, nicknamed Watercube is built with ETFE.)

Advantages of ETFE layer:

1. Self-cleaning: Be free from maintenance, rainfall cleans the dirt due to its nonstick surface.

2. Tear resistant, corrosion resistant and fire resistance.

3. Featuring with honey - comb structure which enhance 10% natural lighting, high transparency(95%) to ultra-violet light.

4. Long life and recyclable, the age of ETFE laminated membrane is up to 25 years, later it could be frited for other use, 100% recyclable.

5. Low weight: ETEF panel weight approximately 20% of a glass framed one.

Warm Tips:

1. Not recommended to connect more than 4 solar panels in parallel, because it will cause over-current which may damage the solar panels and anti-reverse components.

2. Not recommended to use more than 3 solar panels in series connection. Once the voltage exceeds 60V, the temperature will go up and damage the panels .

3. Please handle the solar panel with care and avoid over-bending or bump, otherwise this may result in damage to the product.

4. The ETFE film do not need to remove, it is used to protect the solar panel, just like the cell phone.

Note: Please remember to use the solar panel with solar charger controller

Specification:

Optimal power [Pmax]: 100W

Working voltage [Vmp]: 18V

Working current [Imp]: 5.56A

Short circuit current [Isc]: 5.8A

Open circuit voltage [Voc]: 20V

Dimensions: 119*54*0.25cm/46.8*21*0.09inch

Air resistance: 50psf (2400 pascals)

Snow resistance: 113psf (5400 pascals)

Hail impact: 25mm (1 inch) at 23 m/s (52mph)

Net weight: 1.85kg/4.07lb 



©2016 ALLPOWERS. All rights reserved.